1970年，Statek公司率先使用光刻、化学蚀刻和微机械加工等半导体技术制造晶圆形式的石英谐振器。如今，Statek在设计、开发和制造高度可靠的超微型石英晶振频率控制产品方面仍处于创新的前沿。
创新的内部设计、生产和测试能力不仅使新产品的快速开发和验证成为可能，而且使关键产品特性的持续改进成为可能，如低加速度灵敏度、高冲击、严格的校准容限、低老化、抗辐射和在越来越高的工作温度下高度稳定的频率。
Statek与姐妹公司AdTech Ceramics和Greenray Industries，股份有限公司保持着协同关系，这两家公司都是其行业的领导者。在线访问他们，了解更多关于他们卓越能力的信息。

ORANGE, Ca., – Statek Corporation is proud to announce the release of its 30 kRad tolerant, ultra-high shock, low phase-noise oscillator. Capable of withstanding shocks up to 100,000 g, the CXOXLPNR is housed in a hermetically sealed ceramic 3.2 x2.5 mm package and has an operating temperature range of -55 °C to +125 °C. The CXOXLPNR delivers a low voltage CMOS output with low phase noise, low jitter and low acceleration sensitivity. At 125 MHz, its noise floor is -165 dBc/Hz at 20 MHz offset and the typical RMS phase jitter over 12 kHz to 20 MHz is 75 fs. Available with screening options to meet all program requirements, the CXOXLPNR will become the preferred choice for all
Low Earth Orbit (LEO) applications.

Statek石英晶体振荡器首选低地球轨道.

OSCILLATOR MODEL		PACKAGE (mm)	FREQUENCY RANGE (Click for Data Sheet)
OSCILLATOR MODEL		PACKAGE (mm)	FREQUENCY RANGE (Click for Data Sheet)
CXOU Ultra-Low Power		2.0 x 1.2	32 kHz to 100 kHz
CXOL Ultra-Low Power		3.2 x 1.5	32 kHz to 100 kHz
CXOLAT		3.2 x 1.5	32.768 kHz
CXOLHG High Shock		3.2 x 1.5	16kHz to 32.768 kHz
CXOLHT Performance to 200°C Shock to 100,000g		3.2 x 1.5	16 kHz to 50 MHz
CXOLP Low Power		3.2 x 1.5	1 MHz to 8.5 MHz
CXOQ, CXOQHG High Shock		2.5 x 2.0	16 kHz to 100 MHz
STXO, STXOHG Tight Frequency Stability Shock to 100,000g		3.2 x 2.5	10 MHz to 70 MHz
CXOX, CXOXHG High Shock		3.2 x 2.5	16 kHz to 160 MHz
CXOXHT High Temperature		3.2 x 2.5	32.768 kHz 1 MHz to 50 MHz
CXOXULP Ultra-Low Power		3.2 x 2.5	32.768 kHz
CXOXULPHT High Temperature Ultra Low Power		3.2 x 2.5	32.768 kHz
CXOXLPN Low Phase Noise High Shock		3.2 x 2.5	10 MHz to 125 MHz
CXOXLPNR Radiation Tolerant		3.2 x 2.5	20 MHz to 125 MHz
MTXO, MTXOHG Tight Frequency Stability (±5ppm) High Shock		3.2 x 2.5	10 MHz to 50 MHz
CXOMK, CXOMKHG High Shock		6.5 x 5.0	32.768 kHz 200 kHz to 200 MHz
CXOMKHT High Temperature		6.5 x 5.0	32.768 kHz 200 kHz to 50 MHz
LVDS		3.2 x 5.0 7.0 x 5.0	10 MHz to 160 MHz
ETXO High Frequency		7.5 x 5.0	20 MHz to 125 MHz
HTXO High Temperature		7.5 x 5.0	32.768 kHz 1.5 MHz to 50 MHz
HGXO High Shock		7.5 x 5.0	32.768 kHz to 50 MHz
HGXOHT High Shock High Temperature		7.5 x 5.0	32.768 kHz 460 kHz to 50 MHz

加利福尼亚州奥兰治——Statek公司自豪地宣布发布其30kRad耐受性、超高冲击、低相位噪声石英晶体振荡器。能够承受震动高达100000克，CXOXLPNR封装在3.2x2.5毫米封装，工作温度范围为-55°C至+125°C。这个CXOXLPNR提供低相位噪声、低抖动和低噪声的低电压CMOS输出加速度灵敏度。在125MHz时，其本底噪声在20MHz偏移处为-165dBc/Hz在12kHz到20MHz上的典型RMS相位抖动是75fs。提供筛选选项为了满足所有项目的要求，CXOXLPNR将成为所有项目的首选低地球轨道（LEO）应用。

Located in Orange, California, Statek Corporation is the leading U.S. designer and manufacturer of high reliability crystals and oscillators. Statek’s core competency is its ability to design and manufacture ultra-miniature resonators in quartz wafers using its patented photolithographic and chemical milling processes. Founded in 1970, Statek has become the premier supplier of high shock and high vibration crystals and oscillators for all industries requiring high reliability and extremely robust performance. With superior shock and vibration, extended temperature ranges, small size and extreme high reliability, Statek is the supplier of choice for the Industrial, Military, Medical, and Space industries.Statek公司位于加利福尼亚州奥兰治市，是美国领先的高可靠性晶体和有源晶体振荡器的设计师和制造商。Statek的核心能力是利用其专利设计和制造超小型石英谐振器光刻和化学研磨工艺。Statek成立于1970年，现已成为高冲击和高振动晶体和振荡器的主要供应商，适用于所有需要高可靠性和极其稳健性能的行业。卓越的震动和振动、扩展的温度范围、小尺寸和极高的可靠性，Statek工业、军事、医疗和航天行业的首选供应商。