遥遥领先麦特伦皮Ku波段集成微波组件(IMA)

Ku Band Integrated Microwave Assembly (IMA)

Building on the success of L, S, C, X and Ku-band multiplexers launched over the last four years, MtronPTI is now introducing a Ku-band Integrated Microwave Assembly (IMA) to support broadband communication datalinks used in applications like manned and unmanned aircraft, on the move and fixed ground stations, shipboard beyond line-of-sight wideband satellite communications and all unmanned vehicles. This integrated Ku-band microwave assembly incorporates low insertion loss, high power handling, high isolation between bands, Ku-band diplexer filters that are interconnected with two wave guide RF switches, a coupler and a low pass filter for harmonic suppression. RF cables are fed from the diplexers to a separate RF module consisting of an RF board with low noise amplifiers and an RF switch that switches the receive signal between the two paths. The module contains peripheral control and status circuitry for user access.

MtronPTI’s integrated microwave assembly design and development modeling uses the same circuit, electromagnetic, mechanical, thermal, and stress analysis tools as our customers. This allows MtronPTI’s IMAs design synthesis to be effortlessly integrated into the customer’s system synthesis at early stages in the development process. This design collaboration essentially makes MtronPTI’s design team an extension of the customer’s design team and allows our customer’s resources to focus on their areas of expertise. The end result of having MtronPTI focus on the design concept, prototype development and transition to full rate production is a shortened design cycle and getting our customer’s system to market faster.

Features:
Low Insertion Loss: <2.0dB
High Power Handling: 100W CW
Isolation Between the bands: -125dB
Harmonic Suppression: 2nd -70dB, 3rd -25dB
IMA Noise Figure : <3.8dB
Small Size: 9x7x4 inches max
Applications:
UAS
SATCOM
EW

遥遥领先麦特伦皮Ku波段集成微波组件(IMA)

MTRONPTI麦特伦皮晶振厂家在过去四年推出的L、S、C、X和Ku波段多路复用器取得成功的基础上，MtronPTI现在推出了Ku波段集成微波组件(IMA ),以支持在有人驾驶和无人驾驶飞机、移动和固定地面站、数码电子晶振，船上超视距宽带卫星通信和所有无人驾驶车辆等应用中使用的宽带通信数据链。这种集成的Ku波段微波组件集成了低插入损耗、高功率处理、波段间高隔离、与两个波导RF开关互连的Ku波段双工器滤波器、耦合器和用于谐波抑制的低通滤波器。RF电缆从双工器连接到一个独立的RF模块，该模块由一个带低噪声放大器的RF板和一个在两条路径之间切换接收信号的RF开关组成。该模块包含用户访问的外围控制和状态电路。
MtronPTI麦特伦皮的集成微波组件设计和开发建模使用与客户相同的电路、电磁、机械、热和应力分析工具。医疗产品晶振，这使得MtronPTI的IMAs设计综合可以在开发过程的早期阶段毫不费力地集成到客户的系统综合中。这种设计协作本质上使MtronPTI的设计团队成为客户设计团队的延伸，并允许我们客户的资源专注于他们的专业领域。让MtronPTI专注于设计概念、原型开发和向全速生产过渡的最终结果是缩短设计周期，并让我们客户的系统更快上市。
小体积贴片晶振特点:
低插入损耗：< 2.0dB
高功率处理：100瓦连续波
频带之间的隔离：-125dB
谐波抑制：二阶-70dB，三阶-25dB
IMA噪声系数：< 3.8分贝
小尺寸：最大9x7x4英寸
应用：
无人宇宙空间监视(Unmanned Aerospace Surveillance)
SatelliteCommunications（Agency）卫星通信（机构）
电子战(Electronic Warfare)

遥遥领先麦特伦皮Ku波段集成微波组件(IMA)